Speedscrape has a 1.5 times improved scraping
behaviour, due to diagonally arranged
scraping blades and swinging arms.

OPTIMIZED

CLEANING

PRESSURE.

The blades-swinging arm system allows adaptation of the blades pressure
to the specific conveying situation. In every situation the blades
are pressed to the belt with optimum pressure. Due to the small surface
pressure, the wear and tear of the belt and scraper are reduced. That
also allows the use in High Speed Belting plants with up to 10 m/sec.
The scraping blades are manufactured with a special alloy and sharpen
themselves continuously by means of the contact to the belt.

LOW-VIBRATION FORCE TRANSMISSION

BASED ON RUBBER TORSION ELEMENTS

SUITABLE FOR REVERSING OPERATION

The construction based on swinging arms allows the continuous adaptation
to the belt conditions during operation and is thus suitable for use
at high belt speeds. In reverting mode, the complete scraper swings to a
lower position and thus avoids possible belt damages.

INNOVATIVE & EFFICIENT

Its performance, high material quality, low forces on the belt, scraping
behavior also at high belt speeds and the low maintenance make SpeedScrape
a cost-efficient and at the same time highly effective secondary
scraper.

• Up to 1.5-times larger scraping surface than the belt width
> Better flow of scraped material
• Swinging arm supported blade system
> Optimized pressure on the belt
> Low forces on the belt
> Siding functions when belt is damaged
• ideal for very fast running belt plants like High Speed Belting
(up to 10 m/sec)
• high-alloyed and self-sharpening scraping blades

• more efficient than usual secondary scrapers
• available in different qualities (anti-static)
• reversible
> Complete scraper swings into a lower position
• Long-lasting and low-maintenance
• Easy assembly
• Cost-efficient
• Improving work safety and health protection

ADVANTAGES