Permaflex is suitable for the repair of conveyor
belts, rubber coating and linings as well as
sealing of gaps. 

REPAIRS

RUBBER

SURFACES.

Permaflex is universally applicable and suitable for the repair of conveyor
belts, rubber coating and linings as well as sealing of gaps. Breakthroughs
and longitudinal cracks may for example be repaired up to any
length.


Permaflex consists of a two-component polyurethane and features a fast
processing time. After 30 minutes the processed spot may be ground or
re-worked. There are two different ways of application depending on the
intended purpose: Either by hand or with the help of a spray system.

PERMAFLEX

Overview:
• two-components polyurethane system
• short processing time
• fast, clean and flexible
• dry to the touch after 2 minutes
• may be ground and re-worked after 30 minutes
• free of any volatile substances
• shock-resistant, highly resistant to abrasion
• maximum hardness of 60° shore A
• processing by hand or with the help of a spray system

characteristics
color
elastomere
tensile strength
hardness
abrasion
elongation at break

unit

black
polyurethane
1629 PSL
60 shore A
≤120mm3
≥400%

TECHNICAL DATA

HOW TO USE PERMAFLEX

1. Thoroughly clean the working surface
2. Roughen the working surface
3. Prepare with specific PF-84 Primer
4. Remove the buckle and fasten the mixing tip

5. Place the cartridge in the spray gun
6. Apply Permaflex repair material
7. Spackle if necessary
8. Spot may be re-worked after 30 minutes

1 )

2 )

3 )

4 )

5 )

6 )

7 )

8 )