REPAIRS
RUBBER
SURFACES.
REPAIRS
RUBBER
SURFACES.
Permaflex is suitable for the repair of conveyor belts, rubber coating and linings as well as sealing of gaps.
Permaflex is suitable for the repair of conveyor belts, rubber coating and linings as well as sealing of gaps.
PERMAFLEX
Permaflex is universally applicable and suitable for the repair of conveyor belts, rubber coating and linings as well as sealing of gaps. Breakthroughs and longitudinal cracks may for example be repaired up to any length.
Permaflex consists of a two-component polyurethane and features a fast processing time. After 30 minutes the processed spot may be ground or re-worked. There are two different ways of application depending on the intended purpose: Either by hand or with the help of a spray system.
Overview:
• two-components polyurethane system
• short processing time
• fast, clean and flexible
• dry to the touch after 2 minutes
• may be ground and re-worked after 30 minutes
• free of any volatile substances
• shock-resistant, highly resistant to abrasion
• maximum hardness of 60° shore A
• processing by hand or with the help of a spray system
TECHNICAL DATA
| characteristics | Unit |
| color | Black |
| Elastomere | Polyurethane |
| Tensile strength | 1629 PSL |
| Hardness | 60 shore A |
| Abrasion | ≤120mm³ |
| Elongation at break | ≥400% |
HOW TO USE PERMAFLEX
1. Thoroughly clean the working surface
2. Roughen the working surface
3. Prepare with specific PF-84 Primer
4. Remove the buckle and fasten the mixing tip
5. Place the cartridge in the spray gun
6. Apply Permaflex repair material
7. Spackle if necessary
8. Spot may be re-worked after 30 minutes
